Titanium and its alloys possess excellent physical and mechanical properties such as low density, high specific strength, good fatigue properties, excellent corrosion resistance and biocompatibility [1,2]. These are extensively used in aerospace and...
Albert Einstein was an unbelievably smart physicist, a scientist that studies physics, who is well known throughout the world for his relativity equation, E=mc2. In 1921, Mr. Einstein was award-ed a Nobel Prize in Physics for his theory,The...
The morphologies of the synthesized magnetite PB nanocomposite and modified GODBSA/GA/Fe3O4PB/GC electrode were investigated by TEM and SEM. Figure 1 shows the TEM results of the typical synthesized magnetite PB particle. Numerous round shaped and...
The asphaltene formation in the reservoir is introduce additional issues by injection of CO2 and light hydrocarbon gas. in fact , the destabilization of asphatene can be improve by the presence of light components in the crude oil. some searches...
By using VEP, there are some components that can be assessed such as amplitude, latency and reaction time. Firstly is amplitude which defined as the amount of electrical energy reaching the visual cortex in microvolts (muv). The result of increasing...
compounds and radon covert into vapour and can travel with the steam of the boiling chamber.Distillation unit requires some maintenance, which usually involves draining off such asThe concentrated sediment and other containments that accumulate at...
=Objective1. To determine the radius of gyration of a compund pendulum about its center of gravity.2. To investigate on the effect of fulcrum position.3. To find the acceleration due to gravity 'g'.4. To verify the equation of motion for a compound...
The three major components of an AFM are piezoelectric transducers (in AFM, often known as piezoelectric scanners), force transducers (force sensors), and feedback control system. The basic principle of AFM as shown in Figure 9.4 is, piezoelectric...
Figs. 10 and 11 show the variation in the convection and evaporation potential, respectively, as the fill height changes from 0 to 1.2 m, for different inlet wet-bulb temperatures (from 286 to 294 K). In Fig. 11, it is noted that evaporation...
3.2.3 Pasting profile of composite flour (wheat + GG) Table 6 indicate that peak, final and breakdown viscosity increased with incorporation of guar gum (0.5, 1%) in flour whereas no significant changes ( p>0.05) were observed for trough and setback...
Forget about stressful night
With our academic essay writing service
Popular categories